Products

4" /100 mm Electronic Digital Vernier Calipers (E004)

Product Detailed

1.Measuring Range: 0-100mm/0-4in 2.Three-way measurements 3.certificate:CE 4.Display: LCD 5.Good Quality and low price

•SPECIFICATIONS

1.material:stainless steel

2.measure range:4" / 100mm

3.package:plasic box or according to your requirements

4.caliper length:17 cm

•Technical specifications:

1.Outside Jaws: Measure External Length

2.Inside Jaws: Measure Internal Length

3.Measuring Range: 0-100mm/0-4in,

4.Resolution: 0.01mm/ 0.0005in

5.Accuracy: ± 0.02mm/ 0.001in (<100mm)

±0.03mm/0.001in(>100-200mm)

6.Repeatability: 0.01mm / 0.0005in

7.Max Measuring Speed: 1.5m/sec, 60in/sec

8.Measuring System: Linear Capacitance measuring system

9.Display: LCD Screen

10.Construction Material: Stainless Steel

11.Power: One alkaline lithium button cell battery 1.5v,TYPE LR44.

Capacity-180MAH

12.Working Temperature: 5°c-40°c/41 to 104 degree F

13.Note: Accuracy affected in environments exceeding 80% relative humidity.

•APPLICATIONS

1.Operation : slider can be removed only after the locking screw (#10) is loosened.

2.Basic measuring methods :

1) loosen the locking screw

2) Press "ON " button, select sae or metric measurement by pressing "MM/INCH" button.

Pressing "MM/INCH" button after measurement will display the sae / metric conversion.

3)To reset display to zero, close external measuring jaws, then press "ZERO" button.

Falure	Cause	Measure
Display flashes	Low battery	Replace battery
Display does not change when slider is moved	System locked	Remove battery and replace after 30 seconds to reset system
Accuracy less than +/-0.001mm	Dirt in the sensor	Remove slider cover and its assembly, clean with compress air 5kgs/cm2
No display on LCD	1.improper battery position 2. Low battery	1. Remove battery cover and check battery position 2. Replace battery.

Other products